|
|
|
 |
 |
 |
APRO High-Capacity Industrial 2.5 SATA Flash Drive (800x Speed)
|
Description:
Based on the high-performance SATA interface, APRO introduces a suitable 2.5 SSD which fulfill both demands for critical applications: reliability and performance. The new Hermes-SATA SSD series.
The integrated SATA-Controller offers nearly 100% reliabilty by using a 6-bit Error Correction Code (ECC) with HighSpeed data transmission at the same time. These features will be furthermore supported by the integrated SAMSUNG SLC (Single-Level-Cell) Flash-ICs, which offer higher transmission-rates and more write/erase cycles than comparable 2.5 Flash Drives equipped with MLC (Multi-Level-Cell) Flash-ICs.
For harsh application which demands an extended temperature range from -40°C to +85°C the APRO SATA SSD are also available with controller and Flash-ICs specified for this range. Furthermore the Flash Drives are equippped with a robust metal housing which ensures better mechanical durability.
Beneath this the products offer also all features to be used in industrial applications like:
- The integrated SATA-Controller enables the operation of the drives in nearly all x86 based PC-system equipped with a SATA interface.
- Compatibility and interoperability with most common software-platforms like Windows® 2000, XP, Vista, Linux, Embedded-OS and others.
- With the great advantages of non-volatile and solid state flash, the 2.5 SATA Flash Drives are more robust regarding shock, vibration and mechanical loads than conventional hard disk drives and consume around 10% of the power required by small disk drives.
- > 3.000.000 hours MTBF, up to 2.000.000 write/erase-cycles based on wear-leveling and advanced bad-sector-management and up to 10 years data-backup without any battery-buffer ensures the function of the SATA Flash Drives over a long period of time.
- Possibility of freezing the BOM-list. So APRO can grant a stable delivery of onced delivered and evaluated SSD with permanentely the same components.
- PCN (Product-Change-Notification) 3 month in advance before EOL. Possibility of re-evaluation of new products or last-time-buy.
Features:
NAND SLC Flash Memory Technologie
supports Serial ATA 1.0a/2.0 (1.5Gb/sec. / 3.0Gb/sec.)
standard 2.5 form-factor
Integrated Wear-leveling and advanced bad sector management algorithms
Advanced ECC (Error Code Correction) technology
+5V operation
Standard Grade and Industrial Grade provided
Flash Drive capacity from 8GB up to 64GB
RoHS compliant
customized label and part- or/and serial numbers (optional)
Part-Number:
XX2SFYYYY-ZZZZZ
Description:
X1: operating temperature (S = 0° bis +70°C, W = -40° bis +85°C)
X2: Housing: R = Rugged Metal
2SF: 2.5 SATA Flash
YYYY : Capacity in Bytes (008G, 016G, 032G, 064G)
ZZZZZ: dee details below
Z1 = Controller-Model
Z2 = Controller-Firmware-Version
Z3 = Controller-Grade (C = Commercial, I = Industrial)
Z4 = Flash-IC (S = Single Level Cell, Samsung)
Z5 = Flash-IC-Grade (C = Commercial, I = Industrial)
Content:
2.5 SSD with ordered capacity
Interface:
Serial ATA 1.0a/2.0
Specifications:
Flash Chip: Samsung SLC Flash Memory Chips
Capacity: 8GB, 16GB, 32GB, 64GB
Performance: (Test-Drive, 16GB, 50MB files)
Sequential Read: 120.0 MB/sec
Sequential Write: 78.0 MB/sec
Average Access Time: 0.2ms (estimated)
Environmental Specification:
Operating Temperature: Standard: 0°C to +70°C
Non-Operating Temp.: Standard: -20°C to +80°C
Humidity: 5% to 95% non condensing
Acoustic noise: 0dB
Vibration: 15G, compliance to MIL-STD-810F
Shock: 1,500G, compliance to MIL-STD-810F
Altitude: 70,000 feet
Power:
Power Requirement: +5.0V + - 10%
Reading Mode: 200mA (max.)
Writing Mode: 360mA (max.)
Sleeping Mode: 120mA (max.)
Reliability:
MTBF: >3,000,000 hours
ECC: enhanced management per 6-bit ECC code
Endurance:
>2,000,000 times (contributed by wear-leveling and
advanced bad sector management algorithms)
Data reliability: <1 non-recoverable error in 10(14) bits read
Data retention: 10 years
Physical Specifications:
Weight: 105g (max.)
Seize: 69.50mm x 100.00mm x 9.5mm |
Related Products
euric Knowledge Base
|
|
 |
|
|
|
